User Listings

Posted 8 months ago by John E. Cislak

I have some replacement pumps NOS and used for all 8 and 12 cyl cars. I also have some parts rebuild kits and offer a rebuilding service. Please call if you're interested in anything.

 For Sale Parts

 

Posted 8 months ago by John E. Cislak

This is a painted frame, it never had any chrome acids inside of it to rot it out. It does have rust pits on the outside but no rot holes. Please call if you're interested.

 For Sale Parts

$950.00

Posted 8 months ago by John E. Cislak

Nice clean, minimum rust and pitting, no bends or dents. Complete. Does have 3 replaced louvers. Please call if you're interested.

 For Sale Parts

$750.00

Posted 8 months ago by John E. Cislak

Complete, no bends or dents. Please call if you're interested.

 For Sale Parts

$650.00

Posted 8 months ago by John E. Cislak

No dents or bends. Does have 2 repairs in the upper corners, easy fix. Please call if you're interested.

$150.00

Posted 8 months ago by John E. Cislak

Decent shape as removed. Please call if you're interested.

 For Sale Parts

$150.00

Posted 8 months ago by John E. Cislak

Re-chromed. Not show quality but great for a driver. No repairs, bends, dents, or cracks. Please call if you're interested.

 For Sale Parts

$650.00

Posted 8 months ago by John E. Cislak

Straight, no dents. Does have small cracks in the corner, easy fix. Please call if you're interested.

 For Sale Parts

$450.00

Posted 8 months ago by John E. Cislak

Complete straight grille, no dents or bends. Does have some pitting on the lower section. Louvers are pretty clean. Please call if you're interested.

 For Sale Parts

$650.00

Posted 8 months ago by John E. Cislak

Brass set of 12 Cyl water jackets, wont rust or rot. Ready to install. Perfect Condition $875.00

 For Sale Parts

$875.00

Posted 8 months ago by John E. Cislak

Very nice used shape cleaned ready to install will not rust out. $750.00

 For Sale Parts

$750.00

Posted 8 months ago by John E. Cislak

Full setup for 1931 - 1932 Pierce Arrow Headlights. Nice reflector. All hardware. Both pot metal rings have one crack. Chrome ring is perfect. One has a small bend. Sold as pair. $950.00

 For Sale Parts

$950.00

Posted 8 months ago by John E. Cislak

This is a new reproduction part, comes with brackets. Last one. $250.00 + $40.00 Shipping.

 For Sale Parts

$250.00

Posted 8 months ago by John E. Cislak

I have 10 new old stock Victor head gaskets, fits 4 cyl WC WD RD RE RF RG R10. Please call if you can use one.

 For Sale Parts

 

Posted 8 months ago by John E. Cislak

I have 4 N.O.S. gaskets available. Please call if you can use one.

 For Sale Parts

 

Posted 8 months ago by John E. Cislak

1925 - 1929 Pierce-Arrow truck NOS Victor head gasket. Fits 4 Cyl  X5,  XA - XB, (Vic # 79/516). Anyone who may want or need these please give me a call, I have 6.

 For Sale Parts

 

Posted 8 months ago by John E. Cislak

This fits all 1929 and 1930 Model A & B and 1931 Model 41 &42. This does have a few minor dents in the tube. $375.00 + $25 Shipping

 For Sale Parts

$375.00

Posted 8 months ago by John E. Cislak

One year only. Nice shape, no dents. Condition is original as removed. $550 + $16 Shipping

 For Sale Parts

$550.00

Posted 8 months ago by John E. Cislak

New chrome, completely disassembled. All new chrome cap clips re-plated, new points + condenser set up and timed on distributor machine. Ready to run. Call for details.

 For Sale Parts

 

Posted 8 months ago by John E. Cislak

1936 - 1938  Owen Dyneto  Starter C0-1309. Completely rebuilt . New brushes, new starter drive, correct plating, new date tag. Completely disassembled, blasted, primed, and plated. Show Quality. Price $1,650.00 + $48.00 shipping.

 For Sale Parts

$1,650.00

Posted 8 months ago by John E. Cislak

Full set with all hardware with keys, need to be re-chromed. $200.00 + $10.00 shipping.

 For Sale Parts

$200.00

Posted 8 months ago by John E. Cislak

1932 hood door knobs. Sold as a pair. Used original knobs to open hood. $60.00 + $6 Shipping

 For Sale Parts

$60.00

Posted 9 months ago by John E. Cislak

1933 - 1938 Pierce Arrow 8 Cyl water pump drive. Complete with new couplers original correct hardware plated like originals, painted ready to install.

 For Sale Parts

$250.00

Posted 10 months ago by John E. Cislak

I have good rebuildable cores for 8 and 12 cylinder engines. Please call with your needs.

 For Sale Parts

 

Posted 10 months ago by John E. Cislak

I have reproduced the top half cover for the headlight switch mounted on the steering box. 3 available, $150.00 each.

 For Sale Parts

$150.00

Posted 10 months ago by John E. Cislak

We rebuild water pumps, carburetors, steering boxes, transmissions, engines, etc. I have been restoring cars for 29 plus years working mostly with Pierce-Arrows. Most people know me through all the parts I make. Some may not know all the Pierce-Arrow components that I rebuild every year. If you need ANY ... Read more

 For Sale Parts

 

Posted 10 months ago by John E. Cislak

New correct running board trim available in aluminum or brass, exact reproduction, includes pieces between the running board and fenders, as well as between the splash apron and running board. Price is $550.00 per set plus shipping.

 For Sale Parts

$550.00

Posted 10 months ago by John E. Cislak

I just finished making new oil lines for the late 8 cylinder engines. Nice clean bends ready for plating. Each line is test fit on an engine to ensure proper alignment. Lines sold with or without cast ends. Call for price.

 For Sale Parts

 

Posted 10 months ago by John E. Cislak

I have just finished making up oil lines for an engine I’m rebuilding here in the shop. If I make parts for a customer I always try to make extras. Like the others posted, these are perfect copies of the original.  They have to be sand bent  (otherwise the lines ... Read more

 For Sale Parts

$475.00

Posted 10 months ago by John E. Cislak

I have just made 8 cyl oil line sets (1933 only) and have one extra set available. These lines are perfect copies of the originals, sand bent with no kinks or flattening of the copper line. Ready for chrome. Price is $390.00+ $120.00 for cast ends. Plus shipping.

 For Sale Parts

$390.00

Posted 10 months ago by John E. Cislak

I have just made (only for 193) 12 cyl oil line sets. These are perfect copies of the originals. Sand bent with no kinks or flattering of the lines. Lines are ready for chrome. Price $445.00 + $120.00 for cast ends. Plus shipping

 For Sale Parts

$445.00

Posted 10 months ago by John E. Cislak

I have a pair of restored horns with brackets ready to install for all V-12 cars and some of the 8's that have horns mounted on the frame under the radiator. If you have a need, please call.

 For Sale Parts

 

Posted 10 months ago by John E. Cislak

Complete drive with new pump couplers. All the correct hardware (plated), painted like new, ready to install.

 For Sale Parts

$275.00

Posted 10 months ago by John E. Cislak

2" Diameter stainless spring used to keep lower hose from collapsing. A common overheating problem is from the pump sucking so much that the lower hose will collapse and not flow water. This happens at higher rpm's so it can go unnoticed and lead to overheating problems. $20.00 + $8.00 ... Read more

 For Sale Parts

$20.00

Posted 10 months ago by John E. Cislak

Stainless springs for hood doors. Fits '29-'31 Pierce-Arrow hoods. Sold as a full set.

 For Sale Parts

$125.00

Posted 10 months ago by John E. Cislak

Full set of stainless valves + valve guides. High quality precise machining and fit. I have sold over 800 of these valves and guides. 8 Cyl and 12 Cyl sets available. Fits Pierce-Arrow, Studebaker and Seagrave fire truck 8s and 12s.

 For Sale Parts

$530.00

Posted 10 months ago by John E. Cislak

1933 - 1938 Pierce-Arrow 12 Cyl water pump drive. Complete with new couplers original correct hardware plated like originals, painted ready to install.

 For Sale Parts

$250.00

Posted 10 months ago by John E. Cislak

These plate brackets fit on the front round tube on the frame of a '29-'31 Pierce-Arrow to mount a front license plate. Exact copies of originals.

 For Sale Parts

$150.00

Posted 10 months ago by John E. Cislak

Fits 2 years only '32-'33. Sold ready to polish, limited supply.

 For Sale Parts

$700.00

Posted 10 months ago by John E. Cislak

1933 only 8 cyl oil line set. Perfect bends, no kinks. Ready for paint. I only made 3 extra sets of these lines.

 For Sale Parts

$440.00

Posted 10 months ago by John E. Cislak

'31-'38 New lug nuts for wire and steel artillery wheels. Large hex, exact copy of the factory originals. Pierce wheels use a large taper and oversized hole and thus need the lug nuts with the larger hex. Sold in sets of five pieces. $35.00 per set, plus shipping. John Cislak, ... Read more

 For Sale Parts

$35.00

Posted 10 months ago by John E. Cislak

My shackle pin sets have over 65 pieces and replace all pins and bearings. Pins are correct size and will press fit as the factory pins did. There are three different sets available covering all 8s and 12s: '29-'30, '31-'35 and '36-'38. In stock and ready to ship. Installed on ... Read more

 For Sale Parts

$650.00

Posted 10 months ago by John E. Cislak

1933-1938 8 and 12 cyl oil filters. Exact reproductions made from billet aluminum as used on Pierce-Arrow and other classic cars. These have a strong housing with an o-ring seal that will not crush or leak like the original conversions do. They look exactly like the originals, same size, shape, ... Read more

 For Sale Parts

$550.00

Posted 10 months ago by John E. Cislak

Available again for all 1929 to 1932 Pierce eight engines. New crowned stainless engine hardware bolts. Exact copy of factory supplied hardware. Much better than trying to chrome your old bolts that will rust, chip, and mar when a wrench is applied. Just polish and install. For horn, water neck, ... Read more

 For Sale Parts

$145.00

Posted 10 months ago by John E. Cislak

This is my last reproduction gas tank for '36-'38 Pierce-Arrows. I have made about 15 of these over the years. Tank has a 3/8 pick up tube needed for modern fuel. I will not make these again because of the time involved in producing them.

 For Sale Parts

$1,750.00

Posted 10 months ago by John E. Cislak

I have available a lot of the little parts hardware stuff sometimes missing for rebuild/restoration like manifold clamps, valve retainers/keepers, lifters, engine nuts+bolts, etc. Please call me with your needs.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

New king pin sets. Available in standard and oversized for all applications. Comes with everything you need, including bearings. Includes two pins, two thrust bearings, four bushings or four bearings and plugs. You won’t be disappointed. $300.00 per set plus shipping.

 For Sale Parts

$300.00

Posted 11 months ago by John E. Cislak

I have available a nice ready to install intake/exhaust manifold. This has had minor flaws repaired. It has been sandblasted,  re-machined, and high temp coated. Call for pricing.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Reproduction 1932 Pierce left tail light stanchions, recently acquired, made about twenty years ago. I do not know who made these but they appear to be nice castings. They are raw and unmachined. One could be cut and rewelded to make a right side bracket if desired. Castings appear to ... Read more

 For Sale Parts

$350.00

Posted 11 months ago by John E. Cislak

1929-1932 Purolator E-2 billet aluminum reproduction oil filters. These are exact copies of the originals. Made from a solid billet blank, they contain a modern spin on filter inside,available at your local parts store for just a few dollars. Once painted they are almost impossible to tell from the factory ... Read more

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

I have a mostly complete 1933 motor from a parts car that I disassembled last year. The motor was cleaned up and painted with spray cans, otherwise it’s as removed. It has nice carbs, starter, generator, water pump, oil cooler, distributor, etc. No oil lines or fuel pump. The car ... Read more

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

This engine came out of a parts car. The car was having restoration work being done to it, so I can assume that the motor was considered to be good. We test ran the engine (video available) and did a compression test. All cylinders have equal compression and the engine ... Read more

 For Sale Parts

$5,800.00

Posted 11 months ago by John E. Cislak

I have front + rear seats complete, door panels, kick panels, ect. All good for patterns, 3 seats were in decent shape.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

I have a very nice clean set available with no hardware or stainless trim.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

I have many grill shells and louver assemblies for most years 1929-1938, and a few model 80 - 81 shells. Call with your needs.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Stainless Steel, exact copies of the originals, with correct heavy washers sold ready to polish. 8 Cyl : $300.00, 12 Cyl : $600.00

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Stainless bolts are sold ready to polish. Exact copies of the original bolts.

 For Sale Parts

$380.00

Posted 11 months ago by John E. Cislak

These fit 1933-38 Pierce Arrows. Exact copies of the originals. I also have a few extra levers available. These will also fit Packard, Cadillac, and others.

 For Sale Parts

$180.00

Posted 11 months ago by John E. Cislak

I have a perfect, super nice, left front fender (it looks like its only about 10 years old).

 For Sale Parts

$300.00

Posted 11 months ago by John E. Cislak

I have one set available. Exact reproduction of the original horn bracket that mounts to the horns on the front frame under the radiator. Some of these may have been used on 8cyl cars also.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Pictured is just some of the 100 or so new parts I make for these Stromberg carburetors. I rebuild/restore more of these carburetors than anyone in the world (I'm the only one who makes these parts). All carbs I rebuild are set up and calibrated for modern fuel. Call with ... Read more

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Rubber water pump drive "hardy disk". Exact reproduction. Die cut, looks like the factory unit. Please call with your year and series. Also have them for the earlier dual valve cars.

 For Sale Parts

$25.00

Posted 11 months ago by John E. Cislak

Timing gear sets, like new gears that have been run, but basically in new condition. Almost impossible to find today. $550.00 for the full set, or $475.00 for the large gear and $100.00 for the small gear. Plus shipping.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

There are 6 different hubs. You must specify year and engine type (8 or 12 cylinder). Sealed-bearing fan hubs to replace the original oil bath hubs that leak, throw oil, and run dry, causing seizures. No more maintenance or fan failure that can damage your radiator. Direct fit. Easy to ... Read more

 For Sale Parts

$300.00

Posted 11 months ago by John E. Cislak

I have 2 1932 (one year only) short block engines + miscellaneous parts, all from 1932.  I'd like to sell everything together. If anyone is interested please give me a call.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Bolt marked with Pierce logo. If you're interested, please give me a call.

 For Sale Parts