Please send obituary notices by email to the Emporium Editor at emporium@pierce-arrow.org.  Content posted on-line will be at the discretion of the Editor.

Posted 5 days ago by Liz Horne

A beautiful addition to your holiday decorations and a wonderful gift for family & friends! Could also be used as a pendant, a wall or window decoration or hanging from a painting or photo of your Pierce-Arrow. Use your imagination! This quality custom made ornament features a 3-dimensional handsome Archer. ... Read more

 For Sale Parts /  Primary

$22.00

Posted 3 days ago by Peter Williams

I have for sale a number of Luzerne Hard Rubber Radiator Caps. These are Series 80 caps that are identical to the black, standard issue, bakelite (?) style radiator caps that are impossible to find. They fit the Series 80 radiator neck perfectly, and they are in Excellent Condition. They are ... Read more

 For Sale Parts /  Primary

$99.99

Posted 2 weeks ago by David & Diana Stevens

Close-out!   We are almost out of our quality low profile black Archer ball cap.   $24 plus $2 shipping. Comfortable fit, Velcro adjustment. top quality embroidery. We have sold these for two years and have only a handful left. Next year we will do a different color. First call, first delivered. ... Read more

 For Sale Parts

$24.00

Posted 4 weeks ago by Chicago Vintage Motor Carriage

LH and RH water jackets for Pierce-Arrow V-12 block. They are 24-14/16" long and 4-5/16" Wide. Please call or email for more information.

 For Sale Parts /  Primary

$800.00

Posted 1 month ago by Vincent Licciardi

Headlight reflector hinge off a 1930 reflector outer ring. Should fit '29, '30, '31, '32 and maybe others. Price $ 55.00. Please e mail or call.

 For Sale Parts

$55.00

Posted 8 months ago by John E. Cislak

Brass set of 12 Cyl water jackets, wont rust or rot. Ready to install. Perfect Condition $875.00

 For Sale Parts

$875.00

Posted 11 months ago by John E. Cislak

I have one set available. Exact reproduction of the original horn bracket that mounts to the horns on the front frame under the radiator. Some of these may have been used on 8cyl cars also.

 For Sale Parts

 

Posted 1 month ago by Robert Sands

A little rust-through in the well areas and may need a little dent straightening; other than that, they are solid.  Most original paint still on, so not covered in rust!  Buy one for $1,000.00 or the pair for $1,500.00.  Will not ship.  Fenders must be picked up here, in the ... Read more

 For Sale Parts /  Primary

$1,500.00

Posted 8 months ago by John E. Cislak

I have 4 N.O.S. gaskets available. Please call if you can use one.

 For Sale Parts

 

Posted 9 months ago by John E. Cislak

1933 - 1938 Pierce-Arrow 12 Cyl water pump drive. Complete with new couplers original correct hardware plated like originals, painted ready to install.

 For Sale Parts

$250.00

Posted 9 months ago by John E. Cislak

I have just made (only for 193) 12 cyl oil line sets. These are perfect copies of the originals. Sand bent with no kinks or flattering of the lines. Lines are ready for chrome. Price $445.00 + $120.00 for cast ends. Plus shipping

 For Sale Parts

$445.00

Posted 11 months ago by John E. Cislak

I have front + rear seats complete, door panels, kick panels, ect. All good for patterns, 3 seats were in decent shape.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Stainless bolts are sold ready to polish. Exact copies of the original bolts.

 For Sale Parts

$380.00

Posted 8 months ago by John E. Cislak

Very nice used shape cleaned ready to install will not rust out. $750.00

 For Sale Parts

$750.00

Posted 9 months ago by John E. Cislak

Full set of stainless valves + valve guides. High quality precise machining and fit. I have sold over 800 of these valves and guides. 8 Cyl and 12 Cyl sets available. Fits Pierce-Arrow, Studebaker and Seagrave fire truck 8s and 12s.

 For Sale Parts

$530.00

Posted 2 months ago by Rick Morrison

Pines Winterfront, patent dates:1914-1921. Very good original condition with great graphics of a period Pierce. Louvers all work, no rust. 22 3/4 inches wide x 24 inches high. $150. Tom Martindale.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Stainless Steel, exact copies of the originals, with correct heavy washers sold ready to polish. 8 Cyl : $300.00, 12 Cyl : $600.00

 For Sale Parts

 

Posted 8 months ago by John E. Cislak

Decent shape as removed. Please call if you're interested.

 For Sale Parts

$150.00

Posted 9 months ago by John E. Cislak

I just finished making new oil lines for the late 8 cylinder engines. Nice clean bends ready for plating. Each line is test fit on an engine to ensure proper alignment. Lines sold with or without cast ends. Call for price.

 For Sale Parts

 

Posted 1 year ago by David & Diana Stevens

1933 thru 1938 Running Board Rubber Mats - A Pierce-Arrow Museum fundraiser. Identical pattern to original. Priced per pair. Mats are 18 inches wide by 66 inches long. Sold in pairs only. Order online at pierce-arrowmuseum.org in the Parts section. Shipping $40 in US, $100 foreign

 For Sale Parts

$600.00

Posted 9 months ago by John E. Cislak

Fits 2 years only '32-'33. Sold ready to polish, limited supply.

 For Sale Parts

$700.00

Posted 9 months ago by John E. Cislak

1933 only 8 cyl oil line set. Perfect bends, no kinks. Ready for paint. I only made 3 extra sets of these lines.

 For Sale Parts

$440.00

Posted 8 months ago by John E. Cislak

Complete, no bends or dents. Please call if you're interested.

 For Sale Parts

$650.00

Posted 8 months ago by John E. Cislak

Nice clean, minimum rust and pitting, no bends or dents. Complete. Does have 3 replaced louvers. Please call if you're interested.

 For Sale Parts

$750.00

Posted 1 year ago by David & Diana Stevens

A very nice gift item for the Ladies or Cooking P-A enthusiasts! A large varied col­lection of favorite recipies from the kitchens of PAS ladies. Pierce graphics and entertaining related recipe namings. Includes handy book stand. Was priced at $30 plus shipping. Now a Museum Fundraiser Sale Priced at $20 ... Read more

 For Sale Parts

$20.00

Posted 2 weeks ago by David & Diana Stevens

Accurate reproduction of the Company Authorized Maintenance Equipment Manual for 1930-31 produced by Bob Dluhy and generously donated to the Pierce-Arrow Museum for a fundraiser. An interesting read for any vintage auto enthusiast plus potential repair and service clues for Pierce-Arrow owners. A great display piece for shop or office. ... Read more

 For Sale Parts /  Primary

$15.00

Posted 8 months ago by John E. Cislak

Straight, no dents. Does have small cracks in the corner, easy fix. Please call if you're interested.

 For Sale Parts

$450.00

Posted 9 months ago by John E. Cislak

I have just finished making up oil lines for an engine I’m rebuilding here in the shop. If I make parts for a customer I always try to make extras. Like the others posted, these are perfect copies of the original.  They have to be sand bent  (otherwise the lines ... Read more

 For Sale Parts

$475.00

Posted 4 weeks ago by Robert Sands

I have a 1930 engine that has been sitting in my garage, for the better part of 30-35 years.  All the goodies are gone.  The head is still on, so all the internals are intact. Engine turns over -not stuck/frozen.  Would make an excellent spare or replacement.  Will not ship.  ... Read more

 For Sale Parts /  Primary

$900.00

Posted 8 months ago by John E. Cislak

New chrome, completely disassembled. All new chrome cap clips re-plated, new points + condenser set up and timed on distributor machine. Ready to run. Call for details.

 For Sale Parts

 

Posted 9 months ago by John E. Cislak

New correct running board trim available in aluminum or brass, exact reproduction, includes pieces between the running board and fenders, as well as between the splash apron and running board. Price is $550.00 per set plus shipping.

 For Sale Parts

$550.00

Posted 8 months ago by John E. Cislak

This fits all 1929 and 1930 Model A & B and 1931 Model 41 &42. This does have a few minor dents in the tube. $375.00 + $25 Shipping

 For Sale Parts

$375.00

Posted 8 months ago by John E. Cislak

I have 10 new old stock Victor head gaskets, fits 4 cyl WC WD RD RE RF RG R10. Please call if you can use one.

 For Sale Parts

 

Posted 8 months ago by John E. Cislak

Complete straight grille, no dents or bends. Does have some pitting on the lower section. Louvers are pretty clean. Please call if you're interested.

 For Sale Parts

$650.00

Posted 8 months ago by John E. Cislak

One year only. Nice shape, no dents. Condition is original as removed. $550 + $16 Shipping

 For Sale Parts

$550.00

Posted 8 months ago by John E. Cislak

This is a painted frame, it never had any chrome acids inside of it to rot it out. It does have rust pits on the outside but no rot holes. Please call if you're interested.

 For Sale Parts

$950.00

Posted 8 months ago by John E. Cislak

Re-chromed. Not show quality but great for a driver. No repairs, bends, dents, or cracks. Please call if you're interested.

 For Sale Parts

$650.00

Posted 9 months ago by John E. Cislak

I have a pair of restored horns with brackets ready to install for all V-12 cars and some of the 8's that have horns mounted on the frame under the radiator. If you have a need, please call.

 For Sale Parts

 

Posted 9 months ago by John E. Cislak

I have reproduced the top half cover for the headlight switch mounted on the steering box. 3 available, $150.00 each.

 For Sale Parts

$150.00

Posted 8 months ago by John E. Cislak

1932 hood door knobs. Sold as a pair. Used original knobs to open hood. $60.00 + $6 Shipping

 For Sale Parts

$60.00

Posted 1 month ago by Peter Williams

I have remaining for sale, one (1) Series 80, Dual Spare Conversion kit. Five (5) pieces of the kit are cast silicon bronze and each seven-piece kit includes:  2-top hanging brackets, 2-bottom extension pieces that move the spare tire assembly further away from the gas tank apron and 1-bottom dual ... Read more

 For Sale Parts /  Primary

$500.00

Posted 8 months ago by John E. Cislak

This is a new reproduction part, comes with brackets. Last one. $250.00 + $40.00 Shipping.

 For Sale Parts

$250.00

Posted 9 months ago by John E. Cislak

Available again for all 1929 to 1932 Pierce eight engines. New crowned stainless engine hardware bolts. Exact copy of factory supplied hardware. Much better than trying to chrome your old bolts that will rust, chip, and mar when a wrench is applied. Just polish and install. For horn, water neck, ... Read more

 For Sale Parts

$145.00

Posted 1 year ago by David & Diana Stevens

A Museum Fundraiser. Original formula lubricant for 1936-38 Power Brake Vacuum Cylinders in an accurate repro­duction collector can. Also appropriate for other similar brake or clutch cylinders. Instructions are included. Developed by Bob Koch, this is a practical item that also looks good on the shelf or in a display ... Read more

 For Sale Parts

$30.00

Posted 8 months ago by John E. Cislak

1925 - 1929 Pierce-Arrow truck NOS Victor head gasket. Fits 4 Cyl  X5,  XA - XB, (Vic # 79/516). Anyone who may want or need these please give me a call, I have 6.

 For Sale Parts

 

Posted 9 months ago by John E. Cislak

I have good rebuildable cores for 8 and 12 cylinder engines. Please call with your needs.

 For Sale Parts

 

Posted 9 months ago by John E. Cislak

'31-'38 New lug nuts for wire and steel artillery wheels. Large hex, exact copy of the factory originals. Pierce wheels use a large taper and oversized hole and thus need the lug nuts with the larger hex. Sold in sets of five pieces. $35.00 per set, plus shipping. John Cislak, ... Read more

 For Sale Parts

$35.00

Posted 8 months ago by John E. Cislak

I have some replacement pumps NOS and used for all 8 and 12 cyl cars. I also have some parts rebuild kits and offer a rebuilding service. Please call if you're interested in anything.

 For Sale Parts

 

Posted 9 months ago by John E. Cislak

Stainless springs for hood doors. Fits '29-'31 Pierce-Arrow hoods. Sold as a full set.

 For Sale Parts

$125.00

Posted 1 year ago by David & Diana Stevens

Charles Clifton of Pierce-Arrow - The sensational book by the Arrow’s Editor and PAS historian Roger Sherman. Subtitled “A Sure Hand and a Fine Automobile” this covers not only his epic history with Pierce-Arrow but his involvement with the early development of the entire auto industry. Lots of detail about ... Read more

 For Sale Parts

$50.00

Posted 9 months ago by John E. Cislak

Complete drive with new pump couplers. All the correct hardware (plated), painted like new, ready to install.

 For Sale Parts

$275.00

Posted 9 months ago by John E. Cislak

These plate brackets fit on the front round tube on the frame of a '29-'31 Pierce-Arrow to mount a front license plate. Exact copies of originals.

 For Sale Parts

$150.00

Posted 8 months ago by John E. Cislak

Full setup for 1931 - 1932 Pierce Arrow Headlights. Nice reflector. All hardware. Both pot metal rings have one crack. Chrome ring is perfect. One has a small bend. Sold as pair. $950.00

 For Sale Parts

$950.00

Posted 1 month ago by William Gluth

Straight and solid, steel door. Surface rust visible where door skin had been sanded. Mid door slightly indented as shown – maximum 1/8”. Wood solid except for: horizontal board which limits down trajectory of window needs replacing & outer vertical post has split at mid-height.  

 For Sale Parts

$150.00

Posted 8 months ago by John E. Cislak

1936 - 1938  Owen Dyneto  Starter C0-1309. Completely rebuilt . New brushes, new starter drive, correct plating, new date tag. Completely disassembled, blasted, primed, and plated. Show Quality. Price $1,650.00 + $48.00 shipping.

 For Sale Parts

$1,650.00

Posted 9 months ago by John E. Cislak

I have available a lot of the little parts hardware stuff sometimes missing for rebuild/restoration like manifold clamps, valve retainers/keepers, lifters, engine nuts+bolts, etc. Please call me with your needs.

 For Sale Parts

 

Posted 8 months ago by John E. Cislak

Full set with all hardware with keys, need to be re-chromed. $200.00 + $10.00 shipping.

 For Sale Parts

$200.00

Posted 11 months ago by John E. Cislak

Rubber water pump drive "hardy disk". Exact reproduction. Die cut, looks like the factory unit. Please call with your year and series. Also have them for the earlier dual valve cars.

 For Sale Parts

$25.00

Posted 9 months ago by John E. Cislak

1933-1938 8 and 12 cyl oil filters. Exact reproductions made from billet aluminum as used on Pierce-Arrow and other classic cars. These have a strong housing with an o-ring seal that will not crush or leak like the original conversions do. They look exactly like the originals, same size, shape, ... Read more

 For Sale Parts

$550.00

Posted 11 months ago by John E. Cislak

I have 2 1932 (one year only) short block engines + miscellaneous parts, all from 1932.  I'd like to sell everything together. If anyone is interested please give me a call.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Bolt marked with Pierce logo. If you're interested, please give me a call.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

These fit 1933-38 Pierce Arrows. Exact copies of the originals. I also have a few extra levers available. These will also fit Packard, Cadillac, and others.

 For Sale Parts

$180.00

Posted 1 year ago by David & Diana Stevens

$22.00 each plus shipping. A beautiful addition to your holiday decorations and a wonderful gift for family & friends! Could also be used as a pendant, a wall or window decoration or hanging from a painting or photo of your Pierce-Arrow. Use your imagination! This quality custom made ornament features ... Read more

 For Sale Parts /  Primary

$22.00

Posted 11 months ago by John E. Cislak

There are 6 different hubs. You must specify year and engine type (8 or 12 cylinder). Sealed-bearing fan hubs to replace the original oil bath hubs that leak, throw oil, and run dry, causing seizures. No more maintenance or fan failure that can damage your radiator. Direct fit. Easy to ... Read more

 For Sale Parts

$300.00

Posted 9 months ago by John E. Cislak

2" Diameter stainless spring used to keep lower hose from collapsing. A common overheating problem is from the pump sucking so much that the lower hose will collapse and not flow water. This happens at higher rpm's so it can go unnoticed and lead to overheating problems. $20.00 + $8.00 ... Read more

 For Sale Parts

$20.00

Posted 11 months ago by John E. Cislak

I have a very nice clean set available with no hardware or stainless trim.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Reproduction 1932 Pierce left tail light stanchions, recently acquired, made about twenty years ago. I do not know who made these but they appear to be nice castings. They are raw and unmachined. One could be cut and rewelded to make a right side bracket if desired. Castings appear to ... Read more

 For Sale Parts

$350.00

Posted 11 months ago by John E. Cislak

New king pin sets. Available in standard and oversized for all applications. Comes with everything you need, including bearings. Includes two pins, two thrust bearings, four bushings or four bearings and plugs. You won’t be disappointed. $300.00 per set plus shipping.

 For Sale Parts

$300.00

Posted 2 months ago by Herbert Tull

Avoid that bad surprise while touring of a broken original axle shaft. Exact fit replacements of this critical part can keep you driving. New axle shafts using steel with modern metallurgy and heat treatment methods provide reliable operation for today's traffic conditions. Price is $750 each plus $75 US shipping. ... Read more

 For Sale Parts /  Primary

$750.00

Posted 11 months ago by John E. Cislak

I have available a nice ready to install intake/exhaust manifold. This has had minor flaws repaired. It has been sandblasted,  re-machined, and high temp coated. Call for pricing.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

I have a perfect, super nice, left front fender (it looks like its only about 10 years old).

 For Sale Parts

$300.00

Posted 9 months ago by John E. Cislak

I have just made 8 cyl oil line sets (1933 only) and have one extra set available. These lines are perfect copies of the originals, sand bent with no kinks or flattening of the copper line. Ready for chrome. Price is $390.00+ $120.00 for cast ends. Plus shipping.

 For Sale Parts

$390.00

Posted 1 year ago by David & Diana Stevens

A Museum fundraiser. Authentic reproduction of a 1930 factory ad/poster for dealers done by the late Bill Weikert in the 1980’s. Bill donated his remaining cop­ies to the Pierce-Arrow Museum. 18 x 24 size. An interesting item for home, office or garage. $30.00 plus $5 mailing in the USA. E-mail ... Read more

 For Sale Parts

$30.00

Posted 9 months ago by John E. Cislak

This is my last reproduction gas tank for '36-'38 Pierce-Arrows. I have made about 15 of these over the years. Tank has a 3/8 pick up tube needed for modern fuel. I will not make these again because of the time involved in producing them.

 For Sale Parts

$1,750.00

Posted 1 year ago by David & Diana Stevens

This is a limited quantity Museum fundraiser.  These are exact copies of the very rare left and right Multi-Beam lenses that were used only in these two years and only in Pierce-Arrows. Single glass lens prices went into 4 figures in the 1990’s and continue to rise. These reproductions look ... Read more

 For Sale Parts /  Primary

$700.00

Posted 9 months ago by John E. Cislak

My shackle pin sets have over 65 pieces and replace all pins and bearings. Pins are correct size and will press fit as the factory pins did. There are three different sets available covering all 8s and 12s: '29-'30, '31-'35 and '36-'38. In stock and ready to ship. Installed on ... Read more

 For Sale Parts

$650.00

Posted 9 months ago by David & Diana Stevens

$20 each plus $5 for tube & postage in USA or combine with any of our other advertised Pierce posters for big savings. Save big with this Holiday Special: Any 3 for $50 or 7 for $100 in tube with free postage  in USA only until Dec. 24, 2021! Free ... Read more

 For Sale Parts /  Primary

$20.00

Posted 1 year ago by David & Diana Stevens

The Pierce-Arrow Museum has reproduced high quality distributor cap & rotor sets to keep your Pierce 12 running down the road smooth & steady. Priced lower than NOS caps alone sold for more than a decade ago, NOS caps are almost unobtainable today. Order on the Pierce-Arrow Museum website for ... Read more

 For Sale Parts /  Primary

$1,150.00

Posted 9 months ago by John E. Cislak

1933 - 1938 Pierce Arrow 8 Cyl water pump drive. Complete with new couplers original correct hardware plated like originals, painted ready to install.

 For Sale Parts

$250.00

Posted 11 months ago by John E. Cislak

I have many grill shells and louver assemblies for most years 1929-1938, and a few model 80 - 81 shells. Call with your needs.

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

Timing gear sets, like new gears that have been run, but basically in new condition. Almost impossible to find today. $550.00 for the full set, or $475.00 for the large gear and $100.00 for the small gear. Plus shipping.

 For Sale Parts

 

Posted 1 month ago by William Gluth

Properly cared for. Complete with camshaft and crankshaft. In dry storage for years with much protective grease applied in cylinders and to crankshaft gear. Original cylinder bore with very little wear.

 For Sale Parts /  Primary

$450.00

Posted 1 month ago by William Gluth

17" Rolled-edge artillery wheels for 1934-35 Pierce-Arrows.  Two, in good condition, ready to ship. Shipping costs paid by purchaser.

 For Sale Parts /  Primary

$200.00

Posted 9 months ago by John E. Cislak

We rebuild water pumps, carburetors, steering boxes, transmissions, engines, etc. I have been restoring cars for 29 plus years working mostly with Pierce-Arrows. Most people know me through all the parts I make. Some may not know all the Pierce-Arrow components that I rebuild every year. If you need ANY ... Read more

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

1929-1932 Purolator E-2 billet aluminum reproduction oil filters. These are exact copies of the originals. Made from a solid billet blank, they contain a modern spin on filter inside,available at your local parts store for just a few dollars. Once painted they are almost impossible to tell from the factory ... Read more

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

This engine came out of a parts car. The car was having restoration work being done to it, so I can assume that the motor was considered to be good. We test ran the engine (video available) and did a compression test. All cylinders have equal compression and the engine ... Read more

 For Sale Parts

$5,800.00

Posted 11 months ago by John E. Cislak

Pictured is just some of the 100 or so new parts I make for these Stromberg carburetors. I rebuild/restore more of these carburetors than anyone in the world (I'm the only one who makes these parts). All carbs I rebuild are set up and calibrated for modern fuel. Call with ... Read more

 For Sale Parts

 

Posted 11 months ago by John E. Cislak

I have a mostly complete 1933 motor from a parts car that I disassembled last year. The motor was cleaned up and painted with spray cans, otherwise it’s as removed. It has nice carbs, starter, generator, water pump, oil cooler, distributor, etc. No oil lines or fuel pump. The car ... Read more

 For Sale Parts