6-7 gallons is correct!
WEBSITE IS UP AND BLAZING! WOW!
WOW! WHOMEVER MADE THAT CAGE MADE AN ABSOLUTE KNOCKOUT!
Here’s the direct link to see and purchase! They are great jackets!
https://store27282557.company.site/North-End-Mens-Techno-Lite-Jacket-p493997251
It would make a wonderful December calendar photo for 2024! Just sayin’
Hi Pat – Pierce did make one model that had a hood with no louvers – 1934 836A. They had overheating problems and the factory retro fitted with the 1935 hood that had louvers to make the customers happy. Hope this helps!
We should add this service by Otto to the Parts & Services Directory, Gentlemen! Please forward information so others can benefit! 🙂
Hi Campbell! Here is some information on Hart’s Machine in Ohio. Not as close as you like, but as you have found, most folks aren’t 100 year old engine folks. Hope this helps!
Watched it this past weekend……AGAIN!
Great movie based on a true story of the three Bondurant brothers of Franklin County Virginia. Outstanding acting, cars and script!
Here’s the trailer!
https://www.imdb.com/video/vi789686041?playlistId=tt1212450&ref_=vp_rv_2
Hi Jim – yes it was chromed originally. It’s the shaft of the arrow!
Actually, JC Taylor’s coverage is unlimited driving mileage if you’re going to or participating in a car show event or tour. The 2500 mile limitation is for personal driving each year on top of your car show/tour miles.
I just confirmed by phone to make sure that MY coverage has not changed. I also suggested they review their language on their website because if it confused you it confuses others! They said thanks!!
I have been with J.C. Taylor since buying my first collector car in 1995. They accept stated value and their customer service is excellent! Also, their liability coverage is usually nearly twice as much coverage for the same premium price of other collector car insurance companies.
You hope you never need it, but if you do, more coverage is always a good thing!
Here’s who I’ve talked to all these years!
Tre Hartnett
Large Lines Account Representative
800-272-6785 (Direct line)
Hi Jack – I can recommend Rod Graves at Graves Plating in Florence Alabama. He’s done my plating for 20+ years. Knows his stuff. In addition, he is absolutely the best on pot metal which, as we know, was a favorite of P-A. Phone is (256) 764-9487. Hope this helps!
Oivind – I just sent you a selection of photos via http://www.WeTransfer.com – look for an email and download from the link.
We missed you last week! It was a great year! Weather was dry and pleasant, the vendors were numerous and the crowds were excellent and buying a lot. Car show Saturday was within 40 cars of Pre-Covid registrations at more than 1100 cars. All in all it was a good year! It would have been better,though if you had been able to attend.
Until next year!
Liz Horne
Liz Horne takes 9-11 Thursday, October 7!!!
That mud puddle plunge is Dr. Loh’s photo. It was a PAS Photo Contest winner a few years ago and featured in a PAS Wall Calendar.
Thought that I would utilize that cool picture again! The 52 seconds of the introduction video and animation took me about two weeks to create because there were so many capabilities of the website’s new plugin software, I couldn’t stop experimenting with bits of video and photos!
Hearing that you guys are enjoying it makes all that hard work worth it! Thanks!
It’s back!!!
FROM OUR NEW FRIEND HOWARD IN THE UK ~THANKS AGAIN TO TONY AND MARC FOR THE HELP!!
Hello Liz,
I cannot thank everyone enough for getting this information on the car. It just goes to show that you learn something every day. I have now begun my journey down the Stevens-Dureya rabbit hole!
I have also got hold of a copy of Marc Ralstons’ Pierce-Arrow marque history, just for good measure, so hopefully I will not get caught out again!
Once again, many thanks
Kind regards
Howard
Thanks Mark and Tony! Y’all are great! I will pass this along to solve the family’s “Mystery”!! 😉
You may watch the demonstration from Sunday afternoon here at:
https://drive.google.com/file/d/1UrKiLhpXrbhT0ovFeT4dBEya56h5MEQ5/view?usp=sharing
If you have any additional questions, please list them on this thread and we will answer them as soon as possible. Thanks!