Source for braided fuel lines

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #426855

    I am trying to find a source for braided fuel lines.

    These are 1/2″ fittings and are about 9″

    Before cleaning

    After

     

    #426859

    Bill, From the pictures, I can’t tell if these are metal braids or cloth braids on the hoses.  If metal braids, check out SWAGELOK as they have stainless braid hose, 1/2 inch inside diameter, 37 degree bevel (flare) fittings and 12 inches long (P/N:  SS-CT8AS8AS8-12).  I have dealt with the Raleigh NC office for several years and their service is excellent.
    Another source (perhaps with cloth braid, if that is what you need) may be Raleigh-Durham Rubber and Gasket. I have purchased custom hose and gaskets from them in the past and they carry a wide selection (Web: http://www.raleighdurhamrubber.com/ ) (Raleigh Phone: 800-662-7577).  Good luck with your project. Herb

    #426861

    Herb,

    Thanks for the tip. They are both metal braided. I will check out Swagelok.

    Bill

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.