1937 1702 Front Wheel Grease Seal Part Number?

Home Page › Forums › Chassis › 1937 1702 Front Wheel Grease Seal Part Number?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 2, 2018 at 8:02 am #392209
    Author nameAuthor names are only available to PAS members.

    Does anyone have the part number for the felt seal for the front wheel grease seal? No modern seal apparently fits without machining out the hub, and vintageautopartsusa on eBay has a wide selection of felt seals but needs a part number. This is the large spindle.

    Thanks

    Dave Barclay

    February 2, 2018 at 10:14 am #413310
    Author nameAuthor names are only available to PAS members.

    On my 1703, I machined out the original felt seal carrier for a type 47 nitrile lip seal. The carrier ID was 3.178″ and the lip seal needs a 3.1875-3.1905 ID. I got the seal from NAPA, but do not have the part number in my files.

    February 3, 2018 at 6:39 pm #405994
    Author nameAuthor names are only available to PAS members.

    I found my seal number: National Federal Mogul 4724095S.

    February 3, 2018 at 8:11 pm #405997
    Author nameAuthor names are only available to PAS members.

    Bob:

    Thank you very much! I was just hoping not to have to machine the hub if I didn’t have to.

    Will pull mine in a couple of weeks to see how far it would have to be reamed – there is a local shop with a large lathe that I’m sure could do it for me.

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.