1931 model 43 clock housing

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #413952

    I put this on Facebook while the  PAS forum was down and I haven’t had any comments there, so let’s thy it here

    I have a 1931 and the clock housing was destroyed by the zinc demons and broken beyond repair. The warping was beyond belief. I was very lucky to have found a nearly perfect housing recently, so here’s my thoughts. Does anyone else need one? If there’s enough interest in making some I can look into having a 3D model made and seeing what the cost would be to have some milled out of aluminum. If anyone knows of a reputable/reasonable shop they have used before for similar items please give me your thoughts. If there’s not enough interest, I can put my dash back together with the new housing but I thought I would see about this first.

    Regards, Mark

    https://www.pierce-arrow.org/wp-content/uploads/hm_bbpui/413952/1rou76sgyxxpab01m1qj5djz4ykt2ha7.jpg

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.